Loading Ramp Hook Seats

HOOK SEATS

Welded Aluminum Hook Seat

Pair of 36 inch Aluminum Hook Seats

SHS on Step Allows Ramps to Load Vehicles onto Upper Deck

Steel Hook Seat on Box Van

Does Not Interfere with Doors

Reinforced with Steel Brace

HOOK SEATS "RECEIVE" B-HOOKS Hooks Seats are bolted or welded to your trailer and "receive" the "B Hook" at the upper end of the ramp. Once the "B Hook" is set into the Hook Seat, the two are pinned together with a rod to secure the ramps to the trailer. Hook Seats can either be made of Aluminum ("AHS-Aluminum Hook Seats" ) or Steel ("SHS-Steel Hook Seats). The SHS is welded to your trailer, while the AHS can either be bolted or welded. If you have various trailers in your fleet that will utilize the same ramps, Hook Seats will be required for each trailer.

Proudly Made in the USA

Questions? Give us a call at 1-877-687-RAMP (7267)

Landsport 1220 Sturgis St. Sturgis, SD 57785

Copyright © 2016 by Advanced Aluminum Structures, Inc. LANDSPORT is a trademark of AASI. All content on this website is copyrighted and owned or licensed by AASI. Any unauthorized use of content is strictly prohibited. All rights reserved.

Bolted Aluminum Hook Seats

24 inch AHS

Rod Pins "B Hook" Ramp to Hook Seat

Steel Hook Seat Primed for Painting

Full width Hook Seat

• Secures Ramps To Trailer • Aluminum Hook Seats Can Be Bolted or Welded to Your Trailer • Hook Seats Required for Step if Loading Vehicles on Upper Deck is Desired • 36" Wide Hook Seats Allow Ramps to Slide Closer to the Center of the Trailer to Accommodate Various Widths of Vehicles • Two Year, Limited Manufacturer Warranty (longest in the industry)

(877) 687-7267

HOOK SEATS

Welded Aluminum Hook Seat

Pair of 36 inch Aluminum Hook Seats

SHS on Step Allows Ramps to Load Vehicles onto Upper Deck

Steel Hook Seat on Box Van

Does Not Interfere with Doors

Reinforced with Steel Brace

HOOK SEATS "RECEIVE" B-HOOKS Hooks Seats are bolted or welded to your trailer and "receive" the "B Hook" at the upper end of the ramp. Once the "B Hook" is set into the Hook Seat, the two are pinned together with a rod to secure the ramps to the trailer. Hook Seats can either be made of Aluminum ("AHS- Aluminum Hook Seats" ) or Steel ("SHS-Steel Hook Seats). The SHS is welded to your trailer, while the AHS can either be bolted or welded. If you have various trailers in your fleet that will utilize the same ramps, Hook Seats will be required for each trailer.

Proudly Made in the USA

Landsport 1220 Sturgis St. Sturgis, SD 57785

Bolted Aluminum Hook Seats

24 inch AHS

Steel Hook Seat Primed for Painting

Rod Pins "B Hook" Ramp to Hook Seat

Full width Hook Seat

Questions? Give us a call at 1-877-687-RAMP (7267)